F1600 Mud Pump Liners with Forged Steel Outer Sleeve

• After-sales Service: 7X24
• Warranty: 24 Months
• Certification: ISO 9001:2008, API 7K
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: F1600
• Power Source: Diesel&Electric
• Operation Pressure: Atmospheric Pressure
• Material: Steel
• Type: Drilling Fluid Shale Shaker
• Shipment: by Sea
• Transport Package: Standard Export Package
• Specification: 560X150X150 cm
• Trademark: LFM
• Origin: China
• Production Capacity: 1000

Product Description

Product Description

F1600 Triplex Mud Pump liner, Chromium content 26-28%, HRC hardness greater than 60

Bimetal liner
Material: The material of cylinder liner is ZG45 steel, lined with high chromium cast iron. The HRC of cylinder inside liner is 60-65;
Production Process: The bi-metal cylinder Liner of our company combined with the advantages of abrasion hot-forging out liner and anticorrosion high chrome inner liner. The out liner is made of high quality carbon steel by hot pressing forming. Its tensile strength is over 900000psi. The inner liner is made of high-chromium alloy by centrifugal casting.
Application: Bi-metal cylinder liner is one of the most widely and largest used mud pump fluid end fittings.

Mud Pump Liners
Mud pump liners are including Bi-metal Liners and Ceramic Liners. Sizes of 6 1/2", 7", 140mm, 150mm,160mm, 170mm, 200mm, 230mm liners.
Description
Bi-metal Liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a high chrome inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 59-65HRC. Bi-metal Liners is the main expendable parts of the mud pump, it adapts double metal fix together.
General features:
The outer sleeve is forged steel with quality carbon steel,the inner sleeve is casted with high carbon and high chromimum use the technology of centrigual casting, after treatment ,the hardness of it can reach to a level of 59-67HRC.
Liner Outer Sleeve: 45# forged steel,tensile strength is δb ≥610Mpa ,
yield strength is δs≥450Mpa,elongation hardness is E≥17%,hardness is HRC180-200
Liner Inner Sleeve :high chromium cast iron(centrifugal forged). Annealing hardness is HRC≤ 40.Quenching hardness is HRC59-67
Chemical Composition C 2.8%-3.1% Cr 26%-28% Si 0.6%-0.9% Mn 0.5%-1% Mo 0.5%-0.8% S.P≤0.05%
Ceramic Liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. Ceramic cylinder inner sleeve is used zirconia toughening alumina ceramics obtained the national patent, using zirconium oxide the characteristics of high fracture toughness and high hardness of alumina, the combination of these two can improve the fatigue strength of the product. Its coat uses 45 steel forging with good mechanical properties. After tempering heat treatment, hardness of HB235-265, the tensile strength is not less than 655 mpa.
 

Mud Pump Parts Model We Can Do

BOMCO	F-500	F-800	F-1000	F-1300	F-1600	F-1600HL	F-1600L	F-2200HL
Hong Hua	HHF-500	HHF-800	HHF-1300	HHF-1600	3NB-1600F	5NB-1600	5NB-2400
HRSB	RSF-1300	RSF-1600
RG	RGF-800	RGF-1000	RGF-1300	RGF-1600
Lanzhou	3NB1000C	3NB1300C	3NB1600F	3NB1600L
EMSCO	F-500	F-800	F-1000	F-1300	F-1600	FD-1000	FC-2200	FB-1300
Gardner Denver	PAH	P7	P8/9	P10/11
National	7-P-50	8-P-80	9-P-100	10-P-130	12-P-160	14-P-200	14-P-220
Oilwell	A-850-PT	A-1100-PT	A-1400-PT	A-1700-PT
TSC	WF-500	WF-800	WF-1000	WF-1300	WF-1600	WF-2000	WF-2200
IDECO	T-500	T-800	T-1000	T-1300	T-1600

 

Product Photos

 

 

 

 

 

Factory
 

Certificates

 

FAQ

Q1: What's your packing?
A:  Regular packing.

Q2: What's your delivery?
A:  Normally, about 30-45 days.

Q3:  What are the shipping methods?
A: Ocean shipment to the port near from you; Air shipment to the shipment near from your company; Door to door service by  international express.

Q4:  What about the payment options?
 A: In general, we accept T/T. 

Q5:  When can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in  your  email so that we will detail with your inquiry priority.