Butterfly Valve
100% bi-directional tight shut-off.
Installation without restriction in direction of flow.
Reduced weight and overall dimensions.
Low pressure loss and reduced energy costs.
High Kv / Cv values.
Easy to clean and disinfect for potable water systems etc.
Self cleaning ( no residue will be trapped ).
Good resistance to corrosion.
| Name |
Material |
| Body |
Cast Iron Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
| Disc |
Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
| Shaft |
Stainless Steel Monel K500 |
| Seat |
BUNA NBR EPDM VITON PTFE HEPDM Neoprene Hypalon Natural rubber |
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Technical Parameters
| Standard |
3A,SMS,DIN,ISO,RJT,IDF |
| Product wetted steel parts |
AISI304/AISI316L |
| Other steel parts |
AISI304 |
| Size |
3/4"~6",DN20~DN150,19mm~152.4mm |
| Seal material |
EPDM/VMQ/FPM |
| Working pressure |
≤10bar(145psi) |
| Supply pressure for air actuator |
5~8(0~116psi) |
| Working temperature |
EPDM:-14~248ºF(-10~120ºC) |
| VMQ:-58~356ºF(-50~180ºC) |
| FPM:22~446ºF(-30~230ºC) |
| Other materials are avaible upon request |
| Sterilization temperature |
302ºF(150ºC,max 20min) |
| Outside surface treatment |
Ra16~32uin(o.4~0.8um) |
| Inside surface treatment |
Ra32~64uin(o.8~1.6um) |
| Connetion ends |
butt-weld,clamped ends,male ends, flange ends |
| Pneumatic head |
Normally closed(NC)-Air to open,spring to close |
| Normally open(NO)-Air to close,spring to open |
| Air to air(AA)-Air to open,air to close |
Options
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Factory
Certificates
FAQ
Q1: What's your packing?
A: Regular packing.
Q2: What's your delivery?
A: Normally, about 30-45 days.
Q3: What are the shipping methods?
A: Ocean shipment to the port near from you; Air shipment to the shipment near from your company; Door to door service by international express.
Q4: What about the payment options?
A: In general, we accept T/T.
Q5: When can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will detail with your inquiry priority.
){kind=link}
){kind=link}